Tubular Steel Sizes Available in the Philippines
For the benefit of our Philippine buyers seeking a ready reference on tubular sizes in the Philippines, we have compiled the complete range of tubular steel sizes commonly stocked and supplied. Tubular steel is available in square, rectangular and round profiles, with nominal sizes beginning from 1/2 inch and extending up to 8x8 inches and beyond for structural applications. The most frequently ordered square tube sizes in the Philippines are 1x1, 1-1/2x1-1/2, 2x2, 3x3, 4x4, 5x5 and 6x6 inches, while the most sought-after rectangular tube sizes include 1x2, 1x3, 2x3, 2x4, 2x5, 2x6, 3x4, 4x6 and 2x8 inches.
Standard Length of Tubular Steel in Philippines
The standard length of tubular steel in the Philippines is 6 metres, which is equivalent to approximately 20 feet. This is the commercial length (also referred to as the standard commercial length) that is generally stocked in warehouses and supplied to project sites. Some buyers refer to this as the "tubular length" or "standard tubular length" in common parlance. For special project requirements, custom lengths may be arranged on request, subject to mill rolling schedules and minimum order quantities.
Tubular Steel Thickness and Wall Thickness Reference
The thickness of tubular steel — also referred to as wall thickness — is expressed either in millimetres or by Schedule number. Below is a quick reference for the most commonly specified wall thicknesses of tubular steel in the Philippines:
| Common Thickness (mm) | Approximate Gauge | Typical Application |
| 0.8 mm | Light Duty | Ceiling frames, light partitions |
| 1.0 mm | Light-Medium | Furniture, decorative grills |
| 1.2 mm | Medium | Window grills, gates, fencing |
| 1.5 mm | Medium-Heavy | Roofing trusses, framing, general construction |
| 2.0 mm | Heavy | Structural framing, posts, heavy-duty gates |
| 3.0 mm | Extra Heavy | Structural columns, industrial supports |
| SCH 5 | Thin Wall | Low-pressure piping, general industrial |
| SCH 10 | Medium Wall | Moderate-pressure piping, process lines |
| SCH 40 | Standard Wall | High-pressure piping, structural applications |
Round Tubular Steel Price in Philippines 2026
In addition to square and rectangular profiles, New Eagle Industrial Corporation also supplies round tubular steel (round steel tubes) to our valued clients across the Philippines. Round tube is widely specified for structural columns, handrails, fencing, scaffolding, furniture and industrial piping applications. The price of round tubular steel in the Philippines varies based on the outer diameter, wall thickness, grade and finish. Buyers seeking pricing for round steel tube in the Philippines are welcome to write to us at info@neweagle.co.in with their required OD, wall thickness and quantity for a formal quotation.
GI Tubular Steel Price in Philippines 2026
GI tubular — or galvanised iron tubular steel — is widely used in the Philippines for roofing trusses, fencing, gate frames, ceiling supports and general construction applications owing to its corrosion-resistant zinc coating. The price of GI tubular in the Philippines is generally marginally higher than that of bare (black iron) tubular steel on account of the galvanising process. For buyers seeking a GI tubular price list covering commonly ordered sizes such as 1x1, 2x2, 2x3, 2x4 and 4x4 in galvanised finish, kindly contact our team with your specification and quantity for a competitive quotation. We supply both hot-dip galvanised and pre-galvanised tubular steel to major Philippine ports.
Stainless Steel Tubular Price in Philippines 2026
For projects requiring corrosion resistance, hygienic finish or elevated-temperature capability, we supply stainless steel tubular in grades 304, 304L, 316, 316L, 310 and 904L. The stainless steel tubular price in the Philippines is determined by the grade, size, wall thickness and surface finish selected. Our stainless tubular offering is available in square, rectangular and round profiles, suitable for food processing, pharmaceutical, marine, chemical and architectural applications. Stainless steel square tube in popular sizes such as 1x1 stainless tubular, 2x2 stainless tubular and 2x3 stainless tubular is regularly stocked. Kindly share your complete specification at info@neweagle.co.in for a detailed quotation.
Delivery to All Major Cities Across the Philippines
New Eagle Industrial Corporation regularly exports Tubular Steel Tubes from India to all major ports and cities across the Philippines. Our consignments reach Manila (Port of Manila and Manila International Container Terminal), Cebu, Davao, Subic Bay, Batangas, General Santos, Iloilo, Bacolod, Cagayan de Oro and Zamboanga, among others. Buyers in Metro Manila, Visayas and Mindanao regions may avail of our competitive CIF and FOB pricing. Whether you require delivery to Davao City, Cebu City or any other destination port in the Philippines, our logistics team ensures timely dispatch and seamless documentation for customs clearance.
How are Tubular Steel Tube Prices Determined in Philippines?
The pricing of Tubular Steel Tubes for our Philippine clientele is primarily governed by four key parameters, namely the nominal size and wall thickness, the grade of stainless steel selected, the prevailing mill rates and raw material index, and the quantity ordered. At New Eagle Industrial Corporation, we believe in extending our most competitive pricing through direct mill-to-customer arrangements, thereby eliminating intermediaries and ensuring a transparent cost structure for our buyers.
It may further be noted that surface finishes such as Mill Finish, Pickled Finish, Annealed and Bright Annealed influence the final landed cost. Customisations including specific lengths, end preparations, polishing, marking and packaging are accommodated against bulk enquiries. Our experienced team takes pride in advising buyers on the most cost-effective combination of size, schedule and grade for the intended application, be it construction, marine, oil & gas, food processing or chemical industries in the Philippines.
Why Choose New Eagle as Your Tubular Steel Tube Supplier in Philippines
New Eagle Industrial Corporation has been catering to the Philippine market for several years, supplying Tubular Steel Tubes — including square tubes, rectangular tubes, round tubular steel, stainless steel tubular and GI tubular — to leading projects across Manila, Cebu, Davao, Iloilo, Bacolod, Subic, Batangas, General Santos and Cagayan de Oro. Our commitment to quality is reflected in the Mill Test Certificate (EN 10204 3.1) accompanying each consignment, along with full traceability of heat numbers, chemical composition and mechanical properties. We invite our valued clients to consider the following advantages when sourcing through us:
- Direct mill-to-customer pricing with transparent costing for our Philippine buyers.
- Wide grade availability including 304, 304L, 316, 316L, 310, 904L, Duplex, Super Duplex, Nickel, Monel, Inconel, Hastelloy and Titanium.
- Flexible Minimum Order Quantity beginning from 50 kilograms for standard sizes.
- Mill Test Certificate as per EN 10204 3.1, Certificate of Origin, Packing List and Commercial Invoice provided with every consignment.
- Reliable dispatch from Mumbai with sea transit of 18 to 22 working days to major Philippine ports.
- Dedicated point of contact for quotation, order tracking and after-sales support throughout the Philippines.
Tubular Steel Tube Grades and Standards Supplied to Philippines
Our valued Philippine buyers are welcome to source Tubular Steel Tubes manufactured to internationally recognised ASTM, ASME, EN, DIN and JIS standards. The most frequently specified standards for the Philippine market include ASTM A269, ASTM A249, ASTM A213, ASTM A270 and ASTM A554. We also extend our offering across a wide spectrum of grades including 304, 304L, 316, 316L, 310, 904L, Duplex 2205, Super Duplex S32750, Nickel, Monel, Inconel, Hastelloy and Titanium.
Frequently Asked Questions on Tubular Steel Tube Price in Philippines
1. What is the price of Tubular Steel Tubes in Philippines in 2026?
As of 2026, the price of Tubular Steel Tubes in Philippines ranges from approximately ₱55 to ₱2,000 per piece, depending upon the size, schedule, grade and quantity ordered. A standard 1x1 inch Tubular Steel Tube in Schedule 40 is generally available between ₱75 and ₱280 per piece, whereas larger profiles such as 2x4 and 2x6 inches are priced higher owing to greater material content.
2. What is the Minimum Order Quantity (MOQ) for Tubular Steel Tubes?
At New Eagle Industrial Corporation, we offer flexible MOQ for our valued clients across the Philippines. For standard sizes, our MOQ generally begins from 50 kilograms, while bulk orders attract more competitive slab pricing. We invite buyers to share their project requirement so that we may extend a suitably tailored quotation.
3. Do you ship Tubular Steel Tubes to Manila, Cebu and Davao?
Yes, we regularly export Tubular Steel Tubes from India to all major ports of the Philippines including Manila, Cebu, Davao, Subic, Batangas and General Santos. Shipments are dispatched on CIF or FOB basis as per the buyer's preference, with full documentation provided for smooth customs clearance.
4. What is the lead time for delivery of Tubular Steel Tubes to Philippines?
For stock sizes available in our warehouse, the lead time is generally 7 to 10 working days for dispatch from Mumbai, followed by 18 to 22 days of sea transit to the Philippine ports. For customised or mill-rolled orders, the lead time ranges from 30 to 45 days depending on the grade and quantity requested.
5. Do you provide Mill Test Certificate (MTC) with every consignment?
Yes, every consignment of Tubular Steel Tubes despatched by New Eagle Industrial Corporation is accompanied by a Mill Test Certificate as per EN 10204 3.1 standard, along with the Packing List, Commercial Invoice, Certificate of Origin and other supporting shipping documents required by Philippine customs.
6. What is the difference between SCH 5, SCH 10 and SCH 40 Tubular Steel Tubes?
The Schedule number indicates the wall thickness of the tube for a given nominal size. SCH 5 is the thinnest and is generally preferred for low-pressure applications, SCH 10 offers moderate wall thickness suitable for general industrial use, while SCH 40 is the heaviest amongst the three and is widely specified for higher-pressure piping and structural applications.
7. What grades of Tubular Steel Tubes do you supply to the Philippines?
We supply Tubular Steel Tubes in a wide range of grades including ASTM A269, A249, A213, A270 and A554, in stainless steel grades 304, 304L, 316, 316L, 310 and 904L, as well as in Duplex, Super Duplex, Nickel, Monel, Inconel, Hastelloy, Titanium and Copper variants. Custom grades may also be arranged on specific request.
8. Are customs and import duties included in the quoted price?
Our standard quotations are extended on FOB Mumbai or CIF Philippines basis. Customs clearance charges, import duty and the applicable Value Added Tax in the Philippines are payable separately by the buyer at the destination port, unless explicitly agreed otherwise in writing at the time of order confirmation.
9. Can I request a customised size of Tubular Steel Tube outside the price list?
Yes, in addition to the standard sizes published in our Tubular Steel Tube Price List, we manufacture and supply customised sizes, lengths and wall thicknesses as per the buyer's drawing or specification sheet. Kindly share your requirement at info@neweagle.co.in for a tailored quotation.
10. How can I request a formal quotation for my project in the Philippines?
To request a formal quotation for your project, kindly share your enquiry along with the required size, schedule, grade, quantity and preferred delivery port at info@neweagle.co.in or contact our Marketing Head Mr. Shahil Jain at +91-7506123998. Our team responds to every enquiry within 24 working hours.
11. What is the standard length of tubular steel in the Philippines?
The standard commercial length of tubular steel in the Philippines is 6 metres, which is approximately 20 feet. This standard length applies to square tubes, rectangular tubes and round tubular steel alike. Custom lengths may be arranged on request for bulk orders, subject to mill rolling schedules.
12. What tubular steel sizes are available in the Philippines?
Tubular steel is available in a wide range of sizes for the Philippine market. Square tube sizes include 3/4x3/4, 1x1, 1-1/2x1-1/2, 2x2, 3x3, 4x4, 5x5, 6x6 and 8x8 inches. Rectangular tube sizes include 1x2, 1x3, 2x3, 2x4, 2x5, 2x6, 2x8, 3x4 and 4x6 inches. Each size is available in multiple wall thicknesses ranging from 0.8 mm to 3.0 mm, as well as in SCH 5, SCH 10 and SCH 40 for piping-grade applications.
13. What is the price of 4x4 tubular steel in the Philippines in 2026?
As of 2026, the price of 4x4 tubular steel in the Philippines ranges from approximately ₱550 to ₱1,850 per piece, depending upon the wall thickness, grade and quantity ordered. A 4x4 square tube in 1.5 mm thickness is generally available at the lower end, whereas SCH 40 or 2.0 mm and 3.0 mm variants are priced higher. Galvanised (GI) 4x4 tubular steel is priced at a marginal premium over bare (black iron) finish. Kindly contact us for the latest mill-to-customer rate.
14. How much does tubular steel cost in the Philippines in 2026?
As of 2026, the price of tubular steel in the Philippines varies depending on the size, wall thickness and grade. Prices begin from approximately ₱55 per piece for a 3/4x3/4 inch tube and range up to ₱5,000 or more for larger profiles such as 8x8 inches. For the most commonly requested sizes, a 1x1 inch tubular steel is generally available between ₱75 and ₱280 per piece, a 2x2 tubular steel between ₱210 and ₱720 per piece, and a 2x3 tubular steel between ₱260 and ₱890 per piece. Kindly contact us for a formal quotation in Philippine Pesos tailored to your specific project requirements.
15. What is the difference between square tube, rectangular tube and round tubular steel?
A square tube has equal dimensions on all four sides (for example, 2x2 or 4x4 inches) and is commonly used for structural posts, columns, frames and gates. A rectangular tube has unequal dimensions (for example, 1x2, 2x3, 2x4 or 2x6 inches) and is preferred for beams, trusses, door frames and ceiling supports. Round tubular steel has a circular cross-section and is widely specified for handrails, scaffolding, fencing, furniture and piping applications. All three profiles are available in stainless steel, galvanised iron (GI) and carbon steel variants.
16. Do you supply GI (galvanised) tubular steel to the Philippines?
Yes, we supply both hot-dip galvanised and pre-galvanised tubular steel to the Philippines in all popular sizes including 1x1, 2x2, 2x3, 2x4, 4x4 and 6x6 inches. GI tubular steel is widely preferred for roofing trusses, fencing, ceiling frameworks and outdoor construction in the Philippines owing to its zinc coating which offers protection against corrosion. Pricing for GI tubular is marginally higher than bare finish and is available on request.
